Build

Projects & capstones

Hands-on builds with generic parts lists, wiring, Arduino code, testing and troubleshooting. Capstone lessons are full lessons with an interactive lab, knowledge check and assignment. Roadmap briefs show what each stage builds toward.

Hands-on builds

Overview & parts free · full build with AIHUB Pro

Capstone lessons

Roadmap project briefs

Stage 00Robotics Orientation

Open stage →
  • Design Your First Robot

    Select type, sensors, controller, actuator, and power — generate an architecture summary.

    Build · A notebook-ready architecture block diagram for your first robot

  • Personal lab notebook setup

    Create a structured notebook template for builds, failures, and measurements.

    Build · A reusable build log you will keep for every later stage

Stage 01Math for Robotics

Open stage →
  • Coordinate-frame worksheet

    Hand-compute 2D rotations and frame changes for a planar arm sketch.

    Build · Paper + spreadsheet drills that feed later IK work

  • Locate & move worksheet

    Estimate a desk target in {base}, propose planar joints, and document safety constraints.

    Build · A capstone lab sheet bridging math → arm motion

Stage 02Programming & Python

Open stage →
  • Serial telemetry logger

    Log timestamped joint or sensor samples from a microcontroller to CSV/JSONL.

    Build · A CLI logger you reuse on the 6DOF arm and later sims

  • Capstone robot controller

    Build a sense → decide → act Python controller with logging and stop_all.

    Build · A portfolio controller skeleton for later hardware and ROS stages

Stage 03Linux & Dev Environment

Open stage →
  • Robotics DevBox checklist

    Document a clean Linux install with compilers, Python, Git, venv, and USB permissions.

    Build · A repeatable machine image / checklist for ROS and Isaac later

  • Capstone robotics workspace

    Self-check: shell, files, Git, venv, editor, network/SSH ready for ROS 2.

    Build · A portfolio DevBox checklist + bringup scripts

Stage 04Electronics & Embedded Systems

Open stage →
  • PWM servo bench cell

    Power one servo from a dedicated PSU with common ground and soft limits.

    Build · A safe single-servo test jig used before multi-joint arms

  • Capstone virtual robot circuit

    Self-check: Ohm, GPIO/ADC/PWM, drivers, and Embedded Robot Ready wiring.

    Build · A portfolio electronics checklist bridging Linux → middleware/arm work

Stage 05Robotics Fundamentals

Open stage →
  • Cardboard DOF model

    Build a labeled planar or spatial joint model and demonstrate reachable poses.

    Build · A physical DOF teaching aid before buying the full arm kit

  • Capstone: Design Your First Robot

    Produce an architecture summary: platform, DOF, actuators, sensors, SPA, envelope.

    Build · A portfolio design one-pager bridging to Stage 6

Stage 066DOF Robotic Arm

Open stage →
  • Assemble & bring up the 6DOF arm

    Complete the chapter path: structure → power → firmware → IK → first motions.

    Build · A working desktop 6DOF arm you own and can reprogram

  • Scripted pick-and-place

    Sequence calibrated poses to move a lightweight object between two pads.

    Build · Your first repeatable manipulation demo

Stage 07Control Systems & PID

Open stage →
  • Single-joint PID experiment

    Compare open-loop vs feedback and tune PID on an educational joint plant.

    Build · Tuned controller notebook + recorded step responses

  • Capstone: Tune a Robot Joint

    Drive a joint to 90° under load with rise / overshoot / SSE gates.

    Build · Portfolio gains + metrics for one instrumented joint

Stage 08Kinematics & Inverse Kinematics

Open stage →
  • IK notebook for your arm

    Implement FK and at least one IK approach matched to your measured link lengths.

    Build · A validated kinematics module tied to your Stage 6 hardware

  • Capstone: Design & Solve Kinematics

    Integrated FK/IK workflow with residual metrics on an educational arm model.

    Build · Portfolio checklist + solved targets + singularity honesty notes

Stage 09Trajectory Planning & Motion Generation

Open stage →
  • Joint-space trajectory notebook

    Generate rest-to-rest cubics/quintics between Stage 8 IK waypoints and plot PVAJ.

    Build · Timed joint references ready for controllers / future ROS streaming

  • Part 1: Smooth joint move

    Design a multi-waypoint joint path with linear vs cubic comparison notes.

    Build · Portfolio PVA plots + waypoint list

  • Part 2: Cartesian path with IK health

    Plan a straight task-space move, sample IK, log unreachable/singularity/limit warnings.

    Build · Comparator + Cartesian planner evidence for Part 3 / ROS later

  • Part 3: Plan & execute trajectory

    Integrated start→target→IK→joint/Cartesian→profile→limits→sim→Valid/Invalid on educational 2R.

    Build · Capstone portfolio: PVA + pose error + honesty note

Stage 10ROS 2 & Robot Software Architecture (Fundamentals)

Open stage →
  • ROS 2 architecture card (Part 1)

    Document why middleware, name 4–6 nodes, and map 3 topics with message types for a desk arm.

    Build · Portfolio one-pager bridging Stage 9 trajectories → ROS 2 communication concepts

  • Bring-up card (Part 2)

    Map packages, one launch graph, key services/actions, and a CLI cheat sheet for a desk arm.

    Build · Services/actions/packages/launch/params/CLI — still educational simulators, not a live runtime

  • TF2 + QoS + stack card (Part 3)

    Map frames, joint-state→TF path, QoS profiles for 3 topics, and a Stages 6–9 module interface card.

    Build · TF2/robot state/QoS/full stack — educational simulators

  • ROS 2 6DOF architecture capstone (Part 4)

    Assemble Camera→Vision→Target→IK→Trajectory→Action→Controller→6DOF→Joint States→Feedback; validate nodes, comm types, TF, and feedback.

    Build · Educational architecture simulator (ros2-architecture-capstone) — not a live ROS 2 runtime

Stage 11Computer Vision for Robotics (Vision Foundations)

Open stage →
  • Vision foundations card (Part 1)

    Document camera→pixels→preprocess→edges/shapes for a desk arm marker scenario.

    Build · Portfolio one-pager bridging ROS 2 architecture → perception foundations

  • Feature + detection lab notes (Part 2)

    Compare features/templates, color gating, and educational detector thresholds for a desk marker.

    Build · Decision matrix: classical vs AI for constrained vs varied SKUs

  • Calibration → depth → pose bridge (Part 3)

    Document educational intrinsics residual, projection, depth→XYZ, and pose→Stage 8 IK / Stage 9 traj / Stage 10 topic bridge for a desk pick.

    Build · One-pager: pixel → metre → IK seed (conceptual ROS vision node)

  • Vision-guided 6DOF pick & place (Part 4)

    Run Detect→Depth→Pose→IK→Trajectory→Execute on the educational canvas; record class/conf/bbox, XYZ RPY, IK, traj, final EE, and limitations.

    Build · Capstone evidence card bridging Stage 8/9/10; recommend Stage 12 Robot Simulation & Digital Twin Parts 1–4 next

Stage 12Robot Simulation & Digital Twin

Open stage →
  • Educational twin & model card (Part 1)

    Document why-sim, twin honesty parameters, a toy link/joint tree, and a world/frame map — browser sims only.

    Build · Part 1 evidence card (not Gazebo/Isaac/MuJoCo runtime)

  • Physics + sensors card (Part 2)

    Document toy physics loop, m/g/I intuition, AABB contact + μ/limits, and a sensor stub (truth+noise) — educational approximations only.

    Build · Part 2 evidence card (not Gazebo/Isaac/MuJoCo / not real sensors)

  • Controllers + ROS↔sim bridge card (Part 3)

    Document pos/vel/effort modes, joint cmd/state streams, conceptual Gazebo/Isaac/Webots/MuJoCo maps, and a PASS/FAIL sim test — browser only.

    Build · Part 3 evidence card (not live ROS / not engine install)

  • Capstone twin pick pipeline (Part 4)

    Step model→world→physics→sensors→ROS→vision→IK→traj→ctrl→motion→feedback; record SUCCESS/FAILED and honesty limits.

    Build · Part 4 capstone evidence; recommend Stage 13 Perception/Planning/Manipulation next (do not build)

Stage 13Robot Perception, Planning & Manipulation

Open stage →
  • World model & task card (Parts 1–2)

    Document world layers, pose frames, occupancy AABB, and a task precondition list — browser sims only.

    Build · Parts 1–2 evidence card (not industrial planners)

  • RRT + grasp card (Part 3)

    Document toy RRT/RRT*, gripper choice, and ranked educational grasps — labeled not OMPL/Dex-Net.

    Build · Part 3 evidence card

  • Vision-guided collision-free pick & place (Part 4)

    Step Detect→Pose→World→Grasp→IK→Path→Traj→Execute; record SUCCESS/FAILED with useful reasons.

    Build · Part 4 capstone evidence; recommend Stage 14 Advanced Robotics / RL Parts 1–2 next (live)

Stage 14Advanced Robotics / Reinforcement Learning

Open stage →
  • RL foundations card (Part 1)

    Document classical vs learning, an MDP sketch, ε schedule, and a reward + hack scenario — browser toys only.

    Build · Part 1 evidence; continue into Part 2 DQN intuition

  • DQN intuition pack (Part 2)

    Table-vs-net note, feature sketch, DQN postcard (buffer/online/target), trap checklist — browser toys only.

    Build · Part 2 evidence; Parts 3–4 (policy gradients / sim-to-real) later

Stage 15MoveIt & Motion PlanningPlanned

View on roadmap →
  • Plan & execute a pick pose

    Use MoveIt to plan to a grasp pose and execute on sim or hardware.

    Build · A motion-planning demo on your arm description

Stage 16NVIDIA IsaacPlanned

View on roadmap →
  • Isaac scene for your cell

    Prototype a manipulation or navigation scene with Isaac (when lab content ships).

    Build · GPU-accelerated sim scene aligned to your hardware

Stage 17Physical AIPlanned

View on roadmap →
  • Embodied AI mini-loop

    Connect a model-assisted perception or policy step to real or sim actuation with guards.

    Build · A measured Physical AI experiment — not a demo reel

Stage 18Capstone / ResearchPlanned

View on roadmap →
  • Lab capstone project

    Ship a scoped robot system with BOM, code, eval, and a public-facing report.

    Build · Your portfolio-grade Physical AI / robotics artifact

Stage 19URDF, TF2 & Robot DescriptionPlanned

View on roadmap →
  • URDF for your 6DOF arm

    Author a URDF matching measured link lengths and visualize in RViz.

    Build · A trusted robot description used by MoveIt and sim